| | |
 | Artone Venus Modeling Clay 2 lb. package 51731Y
This superior quality, non-hardening plastic clay is specially recommended as a medium for professional sculptors. This responsive clay is Gray-Green in color, firm yet smooth. Additions of more clay will stick to the existing piece and can be easily smoothed or shaped.
Modeled objects will neither crack nor sag and are unaffected by temperature and humidity. Artone Venus will not shrink and is perfect to make masters in order to cast plaster molds or build rubber latex molds.
Price: $14.69 (Excluding: IN Sales Tax at 7%)
|
| |
|
Industrial Styling Clay (HBX-2) 2 lb. package 50716F
Non-hardening. Amaco® Industrial Styling Clay is excellent for designing large and small models. A medium firmness clay that can be carved, extruded, shellacked or painted and held to +/- 1/2000 inch tolerance.
For small models, no special preparation is necessary. For large models, a kneader-type mixer is required to generate sufficient plasticity. If extra pliability is necessary, this clay may be heated -- but never with direct heat. Industrial Styling Clay is red-brown in color and may be used indefinitely.
Price: $12.59 (Excluding: IN Sales Tax at 7%)
|  |
| |
|
| | Industrial Styling Clay (HBX-2) 64 lb. carton 50717W
Price: $335.95 (Excluding: IN Sales Tax at 7%)
|
| |
|
Marblex Self-Hardening Clay X-242; 2 lb. box 47332S
This gray, self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting.
When completely dry, finished pieces are durable but not waterproof. Knead MarblexTM to increase plasticity before modeling. Keep unused clay in a plastic bag or wrapped in damp cloth to prevent drying out.
It will shrink during drying, so it is best to hollow out bulky sculptures or wrap a slab of clay around a loose crumpled paper armature before modeling.
Allow the finished piece to dry slowly and evenly on all sides at room temperature and away from heat until hard. When piece is completely dry, decorate with AMACO® Rub 'n Buff®, school paints, temperas, acrylics or liquid crayons.
After decorating, it is a good idea to coat with shellac or varnish to seal it and make it water resistant.
Price: $7.89 (Excluding: IN Sales Tax at 7%)
|  |
| |
|
| | Marblex Self-Hardening Clay X-25; 5 lb. box 47336W
Price: $11.95 (Excluding: IN Sales Tax at 7%)
|
| |
|
Marblex Self-Hardening Clay X-25A; 25 lb. carton 47340B
Price: $35.69 (Excluding: IN Sales Tax at 7%)
| |
| |
|
 | Mexican Pottery Clay X-22; 2lb. box 48651B
This red, self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting.
When completely dry, finished pieces are durable but not waterproof. Knead Mexican Pottery ClayTM to increase plasticity before modeling. Keep unused clay in a plastic bag or wrapped in damp cloth to prevent drying out.
It will shrink during drying, so it is best to hollow out bulky sculptures or wrap a slab of clay around a loose crumpled paper armature before modeling.
Allow the finished piece to dry slowly and evenly on all sides at room temperature and away from heat until hard. When piece is completely dry, decorate with AMACO® Rub 'n Buff®, school paints, temperas, acrylics or liquid crayons.
After decorating, it is a good idea to coat with shellac or varnish to seal it and make it water resistant.
Price: $7.89 (Excluding: IN Sales Tax at 7%)
|
| |
|
Mexican Pottery Clay X-119; 5 lb. box 48652C
Price: $11.95 (Excluding: IN Sales Tax at 7%)
| |
| |
|
| | Mexican Pottery Clay X-117; 25 lb. carton 48653D
Price: $35.19 (Excluding: IN Sales Tax at 7%)
|
| |
|
Stonex X-32; 2 lb. box 47337X
This white, self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting.
When completely dry, finished pieces are durable but not waterproof. Knead StonexTM to increase plasticity before modeling. Keep unused clay in a plastic bag or wrapped in damp cloth to prevent drying out.
It will shrink during drying, so it is best to hollow out bulky sculptures or wrap a slab of clay around a loose crumpled paper armature before modeling.
Allow the finished piece to dry slowly and evenly on all sides at room temperature and away from heat until hard. When piece is completely dry, decorate with AMACO® Rub 'n Buff®, school paints, temperas, acrylics or liquid crayons.
After decorating, it is a good idea to coat with shellac or varnish to seal it and make it water resistant.
Price: $9.95 (Excluding: IN Sales Tax at 7%)
|  |
| |
|
| | Stonex X-35; 5 lb. box 47338C
Price: $16.79 (Excluding: IN Sales Tax at 7%)
|
| |
|
Stonex X-25; 25 lb. carton 47339A
Price: $45.19 (Excluding: IN Sales Tax at 7%)
| |
| |
|
 | Air Dry Modeling Clays - Gray; 25 lb. carton 46317P
Moist Clays that are ready to use for sculpture, hand modeling or throwing on a potter's wheel. Finished pieces should be allowed to air dry slowly and evenly on all sides. Decorate with acrylic paints, school paints or Rub 'n Buff® metallic finishes. Air-dried clay is fragile and should be coated with shellac to give it some strength and seal it from moisture. To make pieces hard and permanent, bisque fire in a kiln to Cone 04 (1971°F, 1077°C) before decorating.
Price: $15.79 (Excluding: IN Sales Tax at 7%)
|
| |
|
Air Dry Modeling Clays - White; 25 lb. carton 46318R
Moist Clays that are ready to use for sculpture, hand modeling or throwing on a potter's wheel. Finished pieces should be allowed to air dry slowly and evenly on all sides. Decorate with acrylic paints, school paints or Rub 'n Buff® metallic finishes. Air-dried clay is fragile and should be coated with shellac to give it some strength and seal it from moisture. To make pieces hard and permanent, bisque fire in a kiln to Cone 04 (1971°F, 1077°C) before decorating.
Price: $15.29 (Excluding: IN Sales Tax at 7%)
| |
| |
|
| | Air Dry Modeling Clays - Terra Cotta; 25 lb. carton 46319S
Moist Clays that are ready to use for sculpture, hand modeling or throwing on a potter's wheel. Finished pieces should be allowed to air dry slowly and evenly on all sides. Decorate with acrylic paints, school paints or Rub 'n Buff® metallic finishes. Air-dried clay is fragile and should be coated with shellac to give it some strength and seal it from moisture. To make pieces hard and permanent, bisque fire in a kiln to Cone 04 (1971°F, 1077°C) before decorating.
Price: $15.79 (Excluding: IN Sales Tax at 7%)
|
| |
|
Air Dry Modeling Clays - White: 10lb carton 46314L
Moist Clays that are ready to use for sculpture, hand modeling or throwing on a potter's wheel. Finished pieces should be allowed to air dry slowly and evenly on all sides. Decorate with acrylic paints, school paints or Rub 'n Buff® metallic finishes. Air-dried clay is fragile and should be coated with shellac to give it some strength and seal it from moisture. To make pieces hard and permanent, bisque fire in a kiln to Cone 04 (1971°F, 1077°C) before decorating.
Price: $7.39 (Excluding: IN Sales Tax at 7%)
| |
| |
|
| | Air Dry Modeling Clays -Terra Cotta; 10lb carton 46320A
Moist Clays that are ready to use for sculpture, hand modeling or throwing on a potter's wheel. Finished pieces should be allowed to air dry slowly and evenly on all sides. Decorate with acrylic paints, school paints or Rub 'n Buff® metallic finishes. Air-dried clay is fragile and should be coated with shellac to give it some strength and seal it from moisture. To make pieces hard and permanent, bisque fire in a kiln to Cone 04 (1971°F, 1077°C) before decorating.
Price: $7.39 (Excluding: IN Sales Tax at 7%)
|
| |
|
Amaco Clay Flour X-23; 5 lb. box 46311H
A natural gray clay in dry form that mixes easily with water and fires to a light buff between Cones 5 and 10. Amaco® Clay Flour is exceptionally smooth, pliable, and suitable for hand modeling and wheel throwing.
Price: $11.59 (Excluding: IN Sales Tax at 7%)
|  |
| |
|
| | Amaco Clay Flour X-26A; 50 lb. bag 46312J
Price: $25.19 (Excluding: IN Sales Tax at 7%)
|
| |
|
Amaco Moist Pottery Clay X-11; 5 lb. box 46313K
A natural gray clay in moist form that fires to a light buff between Cones 5 and 10. Amaco® Moist Clay is exceptionally smooth, pliable, and suitable for hand modeling and wheel throwing.
Price: $11.59 (Excluding: IN Sales Tax at 7%)
|  |
| |
|
| | Amaco Moist Pottery Clay X-15; 25 lb. carton 46315M
Price: $15.79 (Excluding: IN Sales Tax at 7%)
|
| |
|
Amaco Moist Pottery Clay X-12; 50 lb. carton 46316N
Price: $25.19 (Excluding: IN Sales Tax at 7%)
| |
| |
|
 | Amaco All-Purpose Sealer 8 oz. jar 76319C
AMACO® All-Purpose Sealer seals and protects almost any surface with a semi-matte finish. It is a specially formulated water based sealant that brushes on white, dries clear, and cleans off brushes with soap and water.
It's ideal for sealing objects made with MarblexTM, Mexican Pottery ClayTM or StonexTM, Claycrete® or Sculptamold® and protects surfaces decorated with Rub 'n Buff®.
Price: $9.49 (Excluding: IN Sales Tax at 7%)
|
| |
|
Kids Clay Tools
These tool sets have everything a child needs to have fun with Easy SqueezyTM Clay or any other children's modeling clay. They include tools to roll out the clay plus a variety of tools to make impressions.
|  |
Type
|
